Jura GIGA6 - Inserting;Changing the Filter

39
5 Maintenance
T Attach the bottom part of the milk system to the part
already inserted from below.
T Fit the cover of the dual spout. It will click into place audibly.
T Connect the milk pipe to the dual spout.
Your GIGA no longer has to be descaled if you are using the CLARIS
Smart filter cartridge.
E Once the filter cartridge stops working (depending on the
water hardness setting), the GIGA will prompt you to change
the filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition:The c symbol is displayed on the start screen (if you
are already using a filter).
T Press the Rotary Switch.
The
‘Change the filter’ message lights up red.
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Smart fil-
ter cartridge and filter extension.
Inserting/changing the
filter