Jura GIGA6 - Setting the Consistency of Grind

27
4 Permanent settings in programming mode
T Touch ‘Save’.
T Touch
‘Back’ to return to the start screen.
In the programme item
‘Set consistency of grind’ you can adjust
both grinders separately to the degree of roast of your coffee.
The consistency of grind is correct if the coffee flows regularly from
the dual spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:The start screen is displayed.
T Press the Rotary Switch.
T Touch the ‘Machine setting’
f.
‘Switch off after’
T Turn the Rotary Switch until ‘Set consistency of grind’ is dis-
played.
T Press the Rotary Switch.
‘Mahlwerk links’
T Touch ‘Save’.
‘Mahlwerk rechts’
T Turn the Rotary Switch to change the setting.
T Touch
‘Save’.
‘Set consistency of grind’
T Touch ‘Back’ the number of times needed to display the start
screen again.
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
Precondition:The start screen is displayed.
T Press the Rotary Switch.
T Touch the ‘Machine setting’
f.
‘Switch off after’
Setting the consistency
of grind
Automatic switch-off