Jura GIGA6 - Dismantling and Rinsing the Dual Spout

37
5 Maintenance
T Place the container under the dual spout and connect the
milk pipe with the container.
T Touch
‘Next’.
‘Milk system is being cleaned’
The operation stops automatically. Your GIGA is once more
ready for use.
The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Press the releasing devices and pull the cover of the dual
spout up and off.
T Carefully pull the bottom part of the milk system down and
off.
T Remove the milk system from the dual spout.
Dismantling and rinsing
the dual spout