Jura GIGA6 - Preparation

16
2 Preparation
2 Preparation
Basic information about preparing drinks:
U
During the grinding operation you can change the coffee
strength of single products. To do this, move your finger
across the display or turn the Rotary Switch.
U
During preparation you can change the preset amounts (e.g.
amount of water or milk foam). To do this, move your finger
across the display or turn the Rotary Switch.
U
You can stop preparation at any time. To do this, press the
‘Cancel’ button or the Rotary Switch.
U
You can move any of the standard products programmed in
your GIGA to your preferred position on the start screen and
make it one of your favourites. You can duplicate and person-
alise your favourite speciality coffees by giving them a new
product name and individual settings (e.g. amount and coffee
strength) (see Chapter 4 ‘Permanent settings in programming
mode – Adjusting the product settings’). Please note that the
descriptions provided in the following sections always refer to
the default settings.
U
Your GIGA has a ‘Smart mode’. If this mode is activated, the
products on the start screen will be rearranged according to
the frequency of preparation after some time. The number of
products displayed on the start screen will vary according to
your personal preferences. The star on the cockpit indicates
that the ‘Smart mode’ is activated.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
The GIGA offers various ways of preparing a speciality coffee, milk or
hot water.
Preparation using the start screen: Simply touch the desired prod-
uct on the start screen (page ‘ö ä ’ or ‘ä ö’).
Ways of preparing a
beverage