'Status' page in the user interface
Lighting graph for the selected profile
The lighting graph displays the light profile for the current day of the week in a graph.
Manual simulation of the time of day
Info
Manual simulation will by default remain active for 60 minutes and can be extended up to 24 hours when necessary if it is not
deactivated. The SmartControl will then switch back to automatic mode.
The manual simulation of the time of day allows you to simulate the light profile for the
current day of the week in fast motion by moving the sliding controller.
Activating manual simulation of the time of day:
1. Connect to the HeliaLux SmartControl's user interface.
2. Select the main '
Status
' menu item.
3. Enable the sliding controller for the manual simulation of the time of day.
4. Move the sliding controller to simulate the course of the day in fast motion.
Via AP mode, please refer to '
Establishing a connection to the user interface via
Access Point Mode
'.
•
Via the home network, please refer to '
HeliaLux SmartControl in home networks
'. •
To Next Page
Loading...
Need help?
General