Lighting profiles
Up to 8 different light profiles can be created with the HeliaLux
SmartControl. You can assign an individual lighting profile to each
day of the week. One light profile can contain up to 16 individual
lighting phases that may be used to adjust all your HeliaLux lamp's
colours throughout the day.
Notice
One light profile (Profile 1) is already preconfigured and assigned
to all 7 days in the HeliaLux SmartControl's factory settings. This
profile may be changed at any time. Please refer to ‘
Configuration
of the Light Profiles
’ to this end.
An individual target time along with the light intensity to be
achieved with the individual colours must be set for each lighting
phase.
The start time for one lighting phase is automatically the
defined end time of the previous lighting phase.
Recommendation:
If the adjusted light intensity is identical for two successive
lighting phases, the light intensity between these phases will
remain constant.
To Next Page
Loading...
Need help?
General