JVC DX-MX70BK User Manual

_ >X-MX70BK |
Updating the Entire Program
You can replace the old program with a new one.
1. Press the STOP/CLEAR button on the CD Player.
STOPICLEAR, PLAY) RE PALES:
—= Eee
This clears the programmed sequence of playback from memory.
To clear the program during playback:
@™ Press the STOP/CLEAR button twice (once to stop, twice to clear the
program from memory).
2. Press the PROGRAM button.
3.
Press
the
CD
10KEY
button
on
the
Remote
Controller.
Pressing
the
CD
10KEY
button
puts
the
numeric
keys
in
CD
mode.
4.
Enter
the
track
numbers
with
the
numeric
keys
in
the
order
you
want
them
played
back.
Cancelling
Programmed
Playback
1. Press the PROGRAM button.
This puts the CD Player in normal ptayback mode. The tracks will play
back in their regular order.
Playing Tracks at Random
In RANDOM mode, the CD player selects and plays tracks at random.
1. Press the RANDOM button on the CD player.
—
CD player starts playing tracks at random.
2. To cancel random playback, press the STOP/CLEAR button.
@ When all tracks in the disc are played once, the random playback ends.
™ If you set the CD player to the REPEAT mode by pressing the REPEAT
button, even after all tracks have been played once, the CD player will
again select and play tracks at random to continue the random playback.
Using the AUTO POWER OFF Function
The power can be automatically turned off when the CD playback is completed.
1. Press the AUTO POWER OFF button on the CD piayer.
©. (AF7O PORER CFF
The indicator light will go on.
2.
Press
the
PLAY/PAUSE
button
on
the
CD
player
or
the
CD
CONTROL
&
button
on
the
Remote
Controller.
The
power
goes
off
automatically
when
the
CD
playback
is
completed.

JVC DX-MX70BK Specifications

General

Brand	JVC
Model	DX-MX70BK
Category	Stereo System
Language	English