JVC DX-MX70BK User Manual

| DX-MX7 OBI
Connecting Other Components
The amplifier can also be connected to a turntable, a Video Cassette Recorder
(VCR), and a Digital Audio Tape (DAT) Deck.
Attach these components as shown.
Turntable
fo --
|
ANALOGUE OUT AUDIO OUT
DAT DECK |
LANALOGUE IN AUDIO IN
Installing the Batteries in the
Remote Controller
1. Remove the battery compartment lid.
Press the lid and slide it in the direction of the arrow.
2. Insert the batteries.
Use two UM-4/AAA/RO3 size batteries. Make sure the + and — polari-
ties on the batteries and compartment are the same.
3. Attach the lid.
Press the lid and slide it in the direction of the arrow.
Note: Batteries installed incorrectly may burst or leak. Pay attentiom to the
foliowing:
™ When the Remote Controller is not in use for a long period of time,
remove the batteries.
® Do not mix old and new batteries.
™ Do not mix batteries of different types, even if their shapes are the same.
™ When batteries become weak, the operating distance of the Remote
Controller is greatly reduced and you will need to replace the batteries.
Plug the power cord on the back of the amplifier into a 120 Volt, 60 Hz AC
household electrical outlet.
Caution: To prevent electric shock, turn all stereo components off before you
install or remove power cords.
important! Before you plug the power cord into an outiet, make sure al! Stereo
components are connected correctly.

JVC DX-MX70BK Specifications

General

Brand	JVC
Model	DX-MX70BK
Category	Stereo System
Language	English