JVC DX-MX70BK User Manual

DX-MX70BK |
Cree
re
Listening to Broadcasts
The Tuner can receive FM and AM broadcasts. Stations can be tuned in
manually, automatically, or from preset memory storage.
Manual Tuning
1. Select the broadcast band you want to tune in by pressing the FM or
AM button on the Tuner.
BAND SELECT
Ces)
2. Press the TUNING/TIMER/DIMMER button (<I or D>) to tune in a station.
TUNING/TIMER /DaMMER,
3. Hold down the TUNING/TIMER/DIMMER button to change the frequen-
cy rapidly, then tap the button to set the frequency precisely.
Automatic Tuning
1. Select the broadcast band you want to tune in by pressing the FM or
AM button on the Tuner.
2. Hold down the TUNING/TIMER/DIMMER button (<i or >) for a moment,
and then release the button.
@ When a station is tuned in, the TUNED indicator lights up.
Note: The Tuner will tune in the nearest strong station.
Presetting Stations in Memory
You can store up to 40 of your favorite radio stations (FM and AM) in
memory, giving you quick, easy access to the stations.
1. Select a band by pressing either the FM or AM button on the Tuner.
2. Press the TUNING/TIMER/DIMMER button (<1 or >) to tune in a station.
3. Press the MEMORY button on the Tuner.
ols
The '‘MEMORY"”’ indicator on the Tuner display blinks for 5 seconds.
4. Press the PRESET button (< or PB) on the Tuner to assign a number
(1-40) to the station, or enter a number (1-40) with the Remote Con-
troller’s numeric keypad.
Example:
To enter 7, press '7"’.
To enter 17, press ‘’+10°’, then ‘'7".
To enter 20, press ‘’+ 10°’, then ‘'10°’.
@ To enter a number with the numeric keypad, you must press the FM
or AM button on the remote controller first.
@ If the “MEMORY” indicator has stopped blinking, press the MEMORY
button again and repeat step 4.
@ if the preset number you choose already has a station assigned to it,
the old station will be replaced by the new one.
5. Press the MEMORY button again.
This stores the station in memory, with the preset number (1-40) you chose
in step 4.
6. Repeat steps 1-5 for each station you want to store in memory with
a@ preset number.
Caution! If the system is unplugged or if a power failure occurs, the preset
Stations stored in memory may be lost.
Cancelling Preset Stations
1. Press the CANCEL button on the Tuner.
O
_ The “CANCEL” light on the Tuner display blinks for 5 seconds.
2. Press the PRESET button (<4 or P) on the Tuner to select the preset
station you want to cancel.
if the “CANCEL” light has stopped blinking, press the CANCEL button
again and repeat step 2.
3. Press the CANCEL button again.
The preset station will be cancelled.
Tuning in Preset Stations
@ Press the PRESET button (4 or PB) on the Tuner to select the preset
Station you want. The preset station numbers are displayed sequen-
tially each time you press the PRESET button.
® You can also select a station by entering its preset number on the Re-
mote Controller‘s numeric keypad.
FM Reception Modes
There are two FM reception modes: AUTO and MONO.
AUTO: Stations are tuned in with either STEREO or MONO, depending
on the strength of the FM signal.
MONO: Stations are tuned in with MONO only. This will reduce interfer-
ence noise of weak stations and make the reception sound better.
1. Press the FM MODE/MUTE button on the Tuner to witch betwveen
the AUTO and MONO reception modes.
G==)
2.
Press
the
FM
MODE/MUTE
button
on
the
Tuner
to
the
AUTO
mode
to
receive
the
station
in
stereo.
@ if a stereo broadcast is received when the FM band is selected, the
“STEREO” light will be displayed on the Tuner.
@ If the FM Reception Mode is MONO, the “STEREO” light will not be
Gisplayed.

JVC DX-MX70BK Specifications

General

Brand	JVC
Model	DX-MX70BK
Category	Stereo System
Language	English