JVC DX-MX70BK User Manual

DX-MX70BK |
Using the CD Player
Starting Playback
1. Press the OPEN/CLOSE button on the CD Player.
Ls)
The CD tray slides out.
2. Place a CD (with the label facing up) in the tray, and press the
OPEN/CLOSE button again.
The tray slides back in.
3. Press the PLAY/PAUSE button on the CD Player, or the CD button on
the Amplifier.
_PATI ONE
ee)
The CD Player begins playing the first track on the CD.
Stopping Playback and Ejecting the CD
1. Press the STOP/CLEAR button.
2. Press the OPEN/CLOSE button, and take the CD out of the tray.
3. Press the OPEN/CLOSE button again to close the tray.
Stopping and Restarting Playback
1. Press the PLAY/PAUSE button.
Playback stops temporarily.
2. Press the PLAY/PAUSE button again.
Playback restarts.
Note: When Tuner is selected as the source, Cd OFF is displayed, and only
the OPEN/CLOSE disc tray and PLAY/PAUSE buttons can be used. To use
other buttons, press the CD button on the Amplifier or the PLAY/PAUSE but-
ton on the CD Player first.
Selecting a Track to Play
Press the SEARCH buttons on the CD player to scan through the track
numbers.
Press the [~=_]} button to find tracks with decreasing numbers, and
the (C757) button to find tracks with increasing numbers.
®@ If you press the SEARCH buttons when the CD Player is in the pause/stop
Mode, you will find the track you selected.
You can restart playback by pressing the PLAY/PAUSE button.
® !f you press the SEARCH button continuously during playback, the CD
will advance rapidly in the direction of the button.
Using the Remote Controller to Select a
Track
There are three ways to search for a track with the remote controller:
Numeric keypad
AUTO SEARCH buttons (==) or (lj
MANUAL SEARCH buttons [Z=_) or (ej
Using the Numeric Keypad
1. Press the CD 10KEY button on the Remote Controller.
2. pla lacing number with the numeric keys.
If the track you want to hear is the 8th track, press the 8 key.
™ if the track you want to hear is the 15th track, press the + 10 key and
the 5 key.
@ if the track you want to hear is the 20th track, press the + 10 key and
the 10 key.
Using the Auto Search Buttons
Press the Auto Search <= = of pei button on the Remote Controller
to scan through the track numbers.
Using the Manual Search Buttons
Press the Manual Search <4 or » buttons on the Remote Con-
troller to search for a certain part of the track.
Listening Repeatedly
Using the REPEAT button, you can play the entire CD or a selected track
repeatedly.
[|
Playing the Entire CD Repeatedly
®8 During playback, press the REPEAT button once.
REPEAT
The CD will play through the last track and then start over again. It
will keep repeating until you cancel the repetition.
Playing a Selected Track Repeatedly
® During playback, press the REPEAT button twice.
REPEAT 1
The current track will play to the end and then start over again. It will
keep repeating until you cancel the repetition.
Cancelling Repetition
Press the REPEAT button again.
Each track will play to the end and not repeat.
wos

JVC DX-MX70BK Specifications

General

Brand	JVC
Model	DX-MX70BK
Category	Stereo System
Language	English