1-18 (No.HC044<Rev.001>)
4.2.5 OP Adjustment
No. Item
Measuring
Instrument &
Input Signals
Mode
Measuring Point (A)
Adjustment Points (B)
Adjustment Level (C)
Adjustment Procedure
1OP adjust-
ment
• Light box
• Collimator
• Focus chart
EE/Video mode
(A)---
• Adjust in 60 Hz(NTSC), the value is also writ-
ten in the 50 Hz(PAL) address.
• Items from a) to h) are automatically adjusted.
(1) Attach the collimator + focus chart to the
camera lens.
(2) Shoot the light box.
(3) Start the adjustment.
(4) When the adjustment is normally finished,
the information screen shows the comple-
tion of the adjustment. The color bar is dis-
played in the unit.
a)Infinity
sensor
(B)60 Hz(NTSC)
:14E0h,14E1h
50 Hz(PAL)
: 64E0h,64E1h
b)Zoom
sensor
(B)60 Hz(NTSC)
:14E2h,14E3h
50 Hz(PAL)
: 64E2h,64E3h
c) Multi
points ad-
justment
(B)60 Hz(NTSC)
: 14E4h to 14EDh
50 Hz(PAL)
: 64E4h to 64EDh
d) Backlash
(Focus)
(B)60 Hz(NTSC)
: 14EEh to 14F0h
50 Hz(PAL)
: 64EEh to 64F0h
e) Backlash
(Zoom)
(B)60 Hz(NTSC)
: 14F1h to 14F3h
50 Hz(PAL)
: 64F1h to 64F3h
f)Tele end
adjustment
(B)60 Hz(NTSC) : 14F7h
50 Hz(PAL): 64F7h
g)Sensor
position fo-
cus pulse
number
(B)60 Hz(NTSC) : 14F8h
50 Hz(PAL): 64F8h
h) Sensor
position
zoom pulse
number
(B)60 Hz(NTSC) : 14F9h
50 Hz(PAL): 64F9h
(C)Automatic adjustment
To Next Page
Loading...
