(No.HC044<Rev.001>)1-29
(3) After reading the EEPROM data, click [Save].
(4) Save the file as a proper name with a serial number in a
proper location. (Extension is XXXXXX.rom)
5.5.3 EEPROM backup data (original file) writing
(1) Specify the location of the backup file saved in 5.2.1 EE-
PROM initial value data writing procedure (3) on the Initial
and Original file navigator screen.
(2) Click Original in Object Model.
(3) Find the target file by the file name from among the dis-
played files.
Select the Conformity file, then click [OK].
(4) The backup data is displayed in the EEPROM Utility
screen. Make sure that the power dial of the unit is turned
OFF, then click [Write].
5.5.4 EEPROM version check
(1) On the SSS main screen, click [EEPROM Utility].
(2) When the EEPROM Utility screen appears, click [Read].
(3) The EEPROM data is read, and the EEPROM version is
displayed in the right bottom of the screen. (CAM and ARM
versions are also displayed.)
Caution
• Before starting EEPROM data writing, be sure to turn OFF
the unit.
• The EEPROM data is the one at the time of the backup. The
adjustment data and the EEPROM version are also the
ones at the time of backup. It is likely to differ from an orig-
inal version, Adjust the unit or update the EEPROM version
as required.
To Next Page
Loading...
