JVC GY-HM180U - Configuring Setup Files; Saving Setup Files

Configuring Setup Files
The menu settings
can be stored on an SD card by
saving them as a setup file.
Loading a saved setup file enables you to
reproduce the appropriate setup state speedily.
The following types of setup files are available.
o
Picture File:
File that contains image creation settings in
accordance to the
shooting conditions ([Camera
Process] menu items).
o
All File:
File that contains all menu settings, ranging from
video format settings to image creation settings
such as device settings and shooting
conditions, as well as the contents of the
[Favorites Menu]. Settings in Overlay Settings
and Network Settings are not saved.
o
User File:
File that contains settings from All File that are
not included in the [Camera Process] menu
items.
(
A P107 [Camera Process Menu] )
Memo :
0
Make use of the [Setup File] menu to save or
load a setup file.
0
The following operations can be performed on
the [Setup File] menu.
0
[Saving Setup Files] (A P 150
)
0
[Loading a Setup File] (A P 151)
Number of Storable Setup Files
SD slot A :
[ W 1 ] to [ W 8 ]
SD slot B :
[
Y 1 ] to [ Y 8 ]
Compatibility
o
User File/All File
0
Only User File/All File of the GY-HM250, GY-
HM180
and GY-HM170
series can be loaded.
0
When User File/All File saved using GY-
HM250 are loaded using GY-HM180/GY-
HM170, the functions that only exist on GY-
HM250 are ignored.
o
Picture File
Only Picture File of the GY-HM250, GY-HM180
and GY-HM170 series can be loaded.
Saving Setup Files
1
Display the [Setup File] menu.
Select [System] B [Setup File
]
and press the
Set button (R).
(A P121 [ Setup File ] )
2
Select [Store File] and
press the
Set button
(R).
3
Select [Picture File], [User File] or [All File],
and press the Set button (R).
The existing files are displayed.
4
Select the file to be newly saved (or
overwritten) using the cross-shaped
button (JK), and press the Set button (R).
.
4
<no file>
<no file>
<no file>
<no file>
<no file>
<no file>
Store Picture File
Memo :
0
Files cannot be written in the following cases.
(Displayed in gray, selection disabled)
0
When the inserted SD card is not supported or
not formatted. (File name appears as “---”.)
0
When a write-protected SD card is inserted
(a z mark appears beside the SD card icon).
5
Name the file.
0
Enter the subname using the software
keyboard.
(A P99 [Text Input with Software Keyboard] )
0
You can enter up to 8 characters for the
[Store File]
/[Picture File] subname.
Memo :
0
When overwriting an existing file, the subname
of the existing file is displayed.
0
Select
[Cancel]
and
press the Set button (R), or
press the [CANCEL/STOP] button to return to
the previous screen.
150
Configuring Setup Files
Camera Features