JVC GY-HM250UG - Deleting Connection Settings; Reading the Connection Settings File

Reading the Connection Settings File
1
Select [System] B [
Network]/[Settings
] B
[Connection Setup] and press the Set
button (R).
2
Select [Load] and
press the Set button (R).
.
2
Delete
Store
Load
Wizard
Connection Setup
3
Select the file to read using the cross-
shaped button (JK), and press the Set
button (R).
.
3
CAM3
CAM2
CAM1
Store Connection Setup
4
Select [Load] on the confirmation screen,
and press the Set button (R).
Loading starts, and “Loading...” appears on the
screen.
.
:YOKOHAMA
4
Cancel
Load
CAM2
Setup?
Load Connection
5
Reading is complete.
After reading of the file is complete, “Complete”
appears on the screen, and the menu screen
closes automatically.
Deleting Connection Settings
1
Select [System] B [Network]/[
Settings]
B
[Connection Setup] and press the Set
button (R).
2
Select [Delete] and press the Set button
(R).
.
2
Delete
Store
Load
Wizard
Connection Setup
3
Select the file to delete using the cross-
shaped button (JK), and press the Set
button (R).
.
3
CAM3
CAM2
CAM1
Delete Connection Setup
4
Select [Delete] on the confirmation screen,
and press the Set button (R).
Deletion starts, and “Deleting...” appears on
the
screen.
.
:TOKYO
4
Cancel
Delete
CAM1
Setup?
Delete Connection
5
Deletion is complete.
After file deletion is complete, “Complete”
appears on the screen.
182
Managing the Network Connection Settings File n
Connecting to the Network n