Splitting the Clips Freely
(Clip Cutter Trig)
You can split
the clips freely without having to stop
recording during shooting.
1
Assign the “Clip Cutter Trig” function to
any of the user buttons.
(A P
42 [Assignment of Functions to User
Buttons] )
2
Press
the
user button that is assigned with
“Clip Cutter Trig” during shooting.
A clip cut icon (
Q) appears on the display
screen for 3 seconds, and the clip is split.
.
1/100
F1. 6
18
dB
AE+6
ND 1/16
12 :34 : 56
Jan 24 , 2015
00:00:00.00
4030 20 10 0
5 . 6 f t
P 15 00 0K
Memo :
0
Clips cannot be split again for a few seconds
after the operation is performed.
0
This item cannot be used when [Slot Mode
] is
set to “Backup”.
0
Available when [System] is set to “4K”, “HD”,
“SD” or “High-Speed”.
(A P123 [ System ] )
0
This item cannot be used when [Rec Mode] is
set to a value other than “Normal”
or “Pre Rec”.
(A P125 [ Rec Mode ] )
0
The split clips are recorded seamlessly without
interruptions in the video.
0
When [W
Format] is set to “Exchange”, clip cutter
function cannot be used. (U model only)
Splitting the Clips Freely (Clip Cutter Trig)
87
Shooting
To Next Page
Loading...
