9
Preset
For setting the user’s bit. (Digit by digit)
Display
: AB CD EF 01
(A P69 [Presetting the User’s Bit] )
Memo :
0
When [UB Mode] is set to
“Date” or “Time”, this
item appears as “---” and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame
mode. Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
0
This item can be set only when
[Main Menu] B
[System] B [Record Set] B [Record Format] B
[WFrame & Bit Rate] is set to “60p”, “30p”, or
“60i”. When the frame rate is “24p”, “Non Drop”
becomes fixed and cannot be selected. When
the frame rate is “50p”, “25p”, or “50i”, this item
appears as “---” and cannot be selected.
(A P
117 [ W Frame & Bit Rate ] )
LCD/VF Menu
Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P108
[Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P109
[Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P110
[Display Settings Item] )
LCD + VF
For selecting a method to switch between the LCD
monitor and viewfinder screen displays.
(A P36 [Adjusting the LCD Monitor and
Viewfinder] )
0
On:
Displays images on the viewfinder at all times.
0
Off:
Turns
off the viewfinder screen display when the
LCD monitor is turned on.
[Setting Values: On, ROff]
Memo :
0
When [Network] is set to
“On”, this item is fixed
at “Off” and cannot be selected.
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select “On” to display in color, and
“Off” to display
in black-and-white.
[Setting Values: ROn, Off]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
When this item is set to
“Off”, only the captured
images are displayed in black-and-white. The
display and menu screens are displayed in
color.
107
Menu Display and Detailed Settings
To Next Page
Loading...
Need help?
General
