Time Code Playback
Time
code or user’s bit recorded on an SD card can
be displayed on the LCD monitor and viewfinder.
Memo :
0
The time code is also superimposed on the
video
signal output from the [HD/SD SDI] output
terminal.
0
User’s bit output from the
[HD/SD SDI] output
terminal is used as a flag to determine valid
video signals. Therefore, accurate values will
not be output.
0
If
a section without time code is played back, the
time code will stop. However, playback will
continue.
Displaying Information during Shooting
During playback, pressing the [DISPLAY] button
shows the display screen.
Pressing the
[AE LOCK/4] button switches the
display information during shooting between no
display, camera information display, and GPS
display.
0
The GPS display displays information on the
recording location of the video being played
back only when GPS information has been
recorded.
The local date/time is displayed.
0
Camera information display displays only
information of Gain, Iris, Shutter and White
Balance that have been recorded.
.
P13000K
1/100
F1. 6
0
dB
+35.483197
+139.652172
Oct 30,2012
07:01:58PM
AE LOCK/4
AE LOCK/4
AE LOCK/4
GPS Display
Camera Information
Display
Hide
Memo :
0
When [System] B [Record Set] B [
Record
Format] B System is set to “HD+SD” or “HD
+Web”, only SD or web files can be played back
from slot B.
In this case, files up-converted into the HD size
are played back in the simple mode.
0
Trimming information is displayed while
trimming is in progress. You cannot switch the
display
using the [AE LOCK/4] button during this
process.
Deleting Clips
Delete clip.
.
OIS / 2 LOLUX / 3
AE LEVEL
MENU/THUMB
CANCEL
MENU/THUMB
CANCEL
Memo :
0
Clips appended with OK marks cannot be
deleted on the camera recorder.
0
Read-only clips can be deleted on a PC.
Deleting One Clip
Delete the clip (one clip) pointed by the cursor in
[Delete Clips] B [This Clip] in the menu.
Memo :
0
Clips with OK mark cannot be deleted.
During Thumbnail Screen
1
Move the cursor to the clip to be deleted.
Move the cursor to the clip to be deleted using
the cross-shaped button (JKH I).
.
2
Press the [LOLUX/3] button.
The action selection screen is displayed.
89
Playback
To Next Page
Loading...
