JVC GY-HM650U - Changing Connection Setup

Changing Connection Setup
You can change the settings for each of the preset
items on the [Wizard] screen of the camera
recorder.
0
If all the items cannot be displayed in a single
page, scroll down to display the remaining
items.
0
Items that cannot be changed are grayed out
according
to the type of adapter connected and
the mode of connection.
.
A
D
C
B
A
Type of Adapter Connected
B
Mode of Wireless LAN Connection
C
[Search Access Point] Button
Tap (click) to display a list of the detected
access points.
The
currently selected access point is indicated
by a dot mark ( 0 ).
.
D
Settings on the [Select Setup Type
] Screen
.
E
E
Settings on the [IP Address Configuration]
Screen
When “DHCP
” is selected, all items will be
grayed out.
.
F
G
H
F
Settings when using cellular adapter
G
Settings on the [Select FTP Proxy
] Screen
H
[OK]/[Cancel] Button
After changing of settings is complete, tap
(click) the [OK] button.
On the confirmation screen, tap (click)
[Execute] to change the settings on the camera
recorder and restart the network.
168
Connecting to the Network