1-26 (No.HC034<Rev.001>)
Refer to 5.1.5 ADVANCED FUNCTION Menu because the oper-
ations are almost the same.
(Bold is the factory setting.)
5.1.8 HOUR METER Menu Operation
(1) Refer to 5.1.2.3 to display the SERVICE MENU.
(2) Move the cursor to [HOUR METER], then press the [Set]
button or the [Cross-Shaped] button (right).
(3) The HOUR METER Menu is displayed.
Refer to 5.1.5 ADVANCED FUNCTION Menu because the oper-
ations are almost the same.
5.1.9 ERROR HISTORY Menu Operation
(1) Refer to 5.1.2.3 to display the SERVICE MENU.
(2) Move the cursor to [ERROR HISTORY], then press the
[Set] button or the [Cross-Shaped] button (right).
(3) The ERROR HISTORY Menu is displayed.
NOTE :
ALL DIP switches are factory use only.
These DIP switches are not used for repair or maintenance.
Therefore all DIP Switch settings which are shown below
should not be changed. And do not forget to return to the initial
position, if setting was changed.
Item Parameter
DIP SW
ALL RE-
SET
CANCEL
EXECUTE
Cancel to reset all DIPSW
settings.
Execute to reset all DIPSW
settings.
DIP SW 1/8 DIP SW 0 0 Change prohibited.
DIP SW 1 to 7 OFF Change prohibited.
DIP SW 2/8 DIP SW 8 to 15 OFF Change prohibited.
--- DIP SW 5/8 ---
DIP SW 32 OFF
DIP SW 33 OFF
DIP SW 34 OFF
DIP SW 35 OFF
DIP SW 36 OFF
DIP SW 37 OFF
DIP SW 38 OFF
DIP SW 39 OFF
BACK
--- DIP SW 6/8 ---
DIP SW 40 OFF
DIP SW 41 OFF
DIP SW 42 OFF
DIP SW 43 OFF
DIP SW 44 OFF
DIP SW 45 OFF
DIP SW 46 OFF
DIP SW 47 OFF
BACK
--- DIP SW 7/8 ---
DIP SW 48 OFF
DIP SW 49 OFF
DIP SW 50 OFF
DIP SW 51 OFF
DIP SW 52 OFF
DIP SW 53 OFF
DIP SW 54 OFF
DIP SW 55 OFF
BACK
--- DIP SW 8/8 ---
DIP SW 56 0
DIP SW 57 0
DIP SW 58 0
DIP SW 59 0
DIP SW 60 0
DIP SW 61 0
DIP SW 62 0
DIP SW 63 0
BACK
DIP SW 3/8 DIP SW 16 to 18 OFF Change prohibited.
DIP SW 19 and 21 0
DIP SW 20 OFF
DIP SW 22 and 23 OFF
DIP SW 4/8 DIP SW 24 and 31 0 Change prohibited.
DIP SW 25 to 30 OFF
DIP SW 5/8 DIP SW 32 to 39 OFF Change prohibited.
DIP SW 6/8 DIP SW 40 to 47 OFF Change prohibited.
DIP SW 7/8 DIP SW 48 to 55 OFF Change prohibited.
DIP SW 8/8 DIP SW 56 to 63 0 Change prohibited.
Item Parameter
POWER 000000 Displays the power hour meter.
CLEAR Resets the power hour meter.
FAN 000000 Displays the fan hour meter.
CLEAR Resets the fan hour meter.
SLOT
EJECT
000000 Displays the slot A and B eject count.
CLEAR Resets the slot A and B eject count.
NOTE :
This menu is not used.
Item Parameter
--- HOUR METER ---
POWER 000000H
FAN 000000H
SLOT EJECT 000000
000000
BACK
A
B
--- ERROR HISTORY ---
CLEAR CANCEL
BACK
To Next Page
Loading...
