9
SD Aspect
For setting the aspect ratio of the SD recording
image when [System] is set to “HD+SD”, “SD”, or
“SD(SDI In)”.
[Setting Values: R16:9, 4:3]
Memo :
0
When [System] is set to “HD”, “HD+Web”, or
“HD(SDI In)”, this item is fixed at “16:9”.
Rec Mode
0
For selecting the record mode for recording to
the SD card.
(A P89 [Special Recording] )
0
The selectable options vary according to the
[Record Format] menu settings.
Format
No. of Frames for
Frame & Bit Rate
Setting values
MP4
(MPEG2)
QuickTime
(MPEG2)
MXF
(MPEG2)
30p, 25p, 24p Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec,
Variable Frame
60p, 60i, 50p, 50i Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
AVCHD 50i, 60i Normal, Pre
Rec, Interval
Rec, Frame Rec
QuickTime
(H.264)
60i (U model)
50i (E model)
Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
60p, 60i, 50p, 50i
30p, 25p, 24p Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec,
Variable Frame
Memo :
0
When [Slot Mode] is set to “Backup”, this item is
fixed at “Normal”.
0
[Variable Frame Rate] is enabled when
[WResolution]/[YResolution] is set to
“1920x1080” or “1280x720”, and the number of
frames for [WFrame & Bit Rate]/[YFrame & Bit
Rate] is set to 30p, 25p, or 24p.
0
When [System] is set to “HD+SD”, “HD+Web”,
“HD(SDI In)”, or “SD(SDI In)”, this item is fixed
at “Normal”.
0
When [Network] in the System menu is set to
other than “Off”, and the KA-M790G (Multicore
Remote Adapter: optional) is connected to the
rear of the camera recorder and power is
supplied from the 26-pin camera cable,
“Variable Frame” is not selectable.
9
Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to “Pre Rec”.
[Setting Values: R5sec, 10sec]
9
Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to “Frame Rec” or “Interval Rec”.
[Setting Values: R1frame, 3frames, 6frames]
9
Rec Interval
For setting the recording time interval when [Rec
Mode] is set to “Interval Rec”.
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
9
Variable Frame Rate
For setting the frame rate during recording when
[Rec Mode] is set to “Variable Frame”.
The available options vary according to the settings
for [Record Format] B [WResolution]/
[YResolution] and [WFrame & Bit Rate]/[YFrame
& Bit Rate].
(A P93 [Variable Frame Rec] )
System Menu
135
Menu Display and Detailed Settings
To Next Page
Loading...
Need help?
General
