11
ENGLISH
• Using the Graphic User Interface (GUI) from the remote controller
You can use the Graphic User Interface in the same way as you touch the panel icons.
Examples:
Display GUI on the monitor
(the cursor—yellow frame—
appears around the currently
selected icon).
• While one of the video
sources is selected, the
GUI function turns on and
off at a press of the button.
2
13
Move the cursor to an icon
you want.
Confirm.
• Using the buttons and controls directly
Some operations are only performed by pressing the buttons directly.
You can also use the buttons and controls on the main unit and remote controller if they have
the same or similar name or marks as shown on the touch panel.
Examples:
To eject a loaded disc.
To eject the monitor or
store it in the
compartment.
GUI
SET UP
To exit from GUI operation mode, press GUI again so that the yellow frame disappears.
OK
OK
08-11_KD-AV7001[EE]f.p65 4/27/05, 11:54 AM11
To Next Page
Loading...
Need help?
General
