JVC KW-V250BTM - Page 11

Disc Disc
Selecting a folder/track on the list
1 Display the folder/track list.
On the source control screen, touch as follows:
2 Select the folder (1), then the item (2) in
the selected folder.
Select an item in each layer until you reach and
select the desired file.
Settings for disc playback
• Available items shown on the <DISC Mode> screen
differ depending on the type of disc/file being
played back.
1 Display the <DISC Mode> screen.
On the source control screen, touch as follows:
Ejecting a disc
Display the pop-up short-cut menu, then
eject the disc.
• When removing a disc, pull it out horizontally.
• You can eject a disc while playing another AV source.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
Playback operations
Audio playback information and key
operation
• For playback information, see “Source control screen”
on page6.
• For key operations on the touch panel, see “Common
operation keys on source control screen” on
page7.
2 Make the settings.
<Menu Language>*1
Select the initial disc menu language. (Initial:
English)
<Subtitle Language>*1
Select the initial subtitle language or turn subtitles
off (Off). (Initial: English)
<Audio Language>*1
Select the initial audio language. (Initial: English)
<Dynamic Range Control>
You can change the dynamic range while playing
Dolby Audio encoded discs.
• Wide: Reproduces powerful sound at a low
volume level with its full dynamic range.
• Normal: Reduces the dynamic range a little.
• Dialog (Initial): Reproduces movie dialog more
clearly.
9
ENGLISH
00_KWV_2019ST_MM2X_EN.indb 900_KWV_2019ST_MM2X_EN.indb 9 1/6/2018 12:07:03 PM1/6/2018 12:07:03 PM