JVC KW-V250BTM - Turning off the Screen and Button Illumination; Adjusting the Volume; Getting Started; Initial Settings

Initial settings
When you power on the unit for the first time or reset
the unit, the <Initial Settings> screen appears.
Perform the initial settings.
Once completed, the Home screen appears.
<Demonstration>
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
Getting Started Getting Started
<Language>
Select the text language used for on-screen
information.
• English (Initial)/Español/Français/Deutsch/
Italiano/Nederlands/Ελληνικά/Português/Türkçe/
Čeština/Polski/Magyar/Руccĸий/
/ /
/ / / /Bahasa
Malaysia/Bahasa Indonesia/
– For external monitors, only English/Spanish/
French/German/Italian/Dutch/Russian/Portuguese
are available. If another language has been
selected, the text language for external monitors
will be set to English.
• GUI Language (Local (the language selected above)
(Initial)/English): Selects the language used for
displaying operation keys and menu items.
<Rear Camera> (Page 32)
Make the settings to display the picture from the
connected rear view camera.
<User Customize> (Page 30)
Change the display design.
<Viewing Angle> (Page 32)
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
• Under 0° (Initial)/5°/10°/15°/20°
2 Turn off the AV source.
On the source/option selection screen, touch as
follows:
Turning off the screen and button
illumination
1 Display the pop-up short-cut menu.
2 On the pop-up short-cut menu, touch as
follows:
(Hold)
To turn on the screen and button illumination:
Press FNC on the monitor panel or touch the screen.
Adjusting the volume
You can adjust the volume (00 to
35) by pressing + to increase and
pressing – to decrease.
• Holding + increases the volume
continuously to level 15.
Basic OperationsBasic Operations
4
ENGLISH
03_KWV_2019ST_MM2X_Body01.indd 403_KWV_2019ST_MM2X_Body01.indd 4 28/6/2018 3:04:41 PM28/6/2018 3:04:41 PM