USBUSB
Selecting a folder/track on the list
1 Display the folder/track list.
On the source control screen, touch as follows:
2 Select the folder (1), then the item (2) in
the selected folder.
E.g. USB list screen
Select an item in each layer until you reach and
select the desired file.
Selecting a folder/track using alphabet
search
(Applicable only for audio file type)
You can search for a folder or an audio file by entering
the first letter you want to search for.
1 Select the list (folder or track) to search.
On the USB list screen, touch as follows:
• [ ]: Folder list
• [ ]: Track list
2 Enter the alphabet to search.
Touch the first letter you want to search for, then
touch [OK].
Settings for USB playback
1 Display the <USB Mode> screen.
On the source control screen, touch as follows:
2 Make the settings.
<Screen Ratio>
Select the monitor type to watch a wide screen
picture on the external monitor.
16:9 (Initial) 4:3 LB 4:3 PS
<Drive Select>
• Next: Switch between internal memory and the
memory source of the connected device (such as
a mobile phone).
Android Android
Connecting an Android device
This unit supports Android OS 4.1 and above.
Android
(commercially available)
USB cable
(commercially available)
On the monitor panel
When connecting an Android device, “AUDIO MODE” is
shown. You can control Android device using a media
player application installed in the Android device.
13
ENGLISH
00_KWV_2019ST_MM2X_EN.indb 1300_KWV_2019ST_MM2X_EN.indb 13 1/6/2018 12:07:03 PM1/6/2018 12:07:03 PM
To Next Page
Loading...
