JVC KW-V250BTM - Component Names and Operations; Basic Operations; How to Reset Your Unit; Turning on the Power

Component Names and Operations Component Names and Operations
1 Reset button
2 Loading slot
3 Screen (touch panel)
4 Built-in microphone*
• You can also connect an external microphone to
the unit (page 40). For details, contact the store
where you purchase this unit.
• See also <MIC SETUP> on page 26.
5 Monitor panel
6 Illumination bar
The brightness of the illumination changes
according to the music level. (Page 31)
7 Volume +/– buttons
8 FNC - button
• FNC (Press, blink once): Pops up the short-cut
menu. (Page 7)
• (Hold, blink twice): Enters favorite setting.
Default: Displays <Sound Effect> screen.
(Page28)
Basic Operations Basic Operations
How to reset your unit
If the unit fails to operate properly, press the reset
button.
Turning on the power
Turning off the power
Turning off the AV source
1 Display the source/option selection
screen.
On the Home screen, touch as follows:
9 - button
• (Press): Turns on the power.
• (Press): Displays the Home screen while the
power is on.
• (Hold): Activates the voice dialing.
p USB input terminal
* Only for KW-V250BT Region 3.
3ENGLISH
03_KWV_2019ST_MM2X_Body01.indd 303_KWV_2019ST_MM2X_Body01.indd 3 18/6/2018 11:35:31 AM18/6/2018 11:35:31 AM