JVC KW-V250BTM - Key Settings; Remote Controller

SettingsSettings
Key settings
Display the <Key Customize> screen.
On the Home screen, touch as follows:
Then, on the <Settings> screen, touch [Key].
Settings
Equalizer
Sound Effect
Fader / Balance
Speaker / X’over
Time Alignment
Enter
Enter
Enter
Enter
Enter
Display
Input
System
Audio
Key
E.g. Key settings screen
<Key Customize>
You can customize the pop-up short-cut menu (page
7).
• You can also customize the (favorite) button.
1 Select the menu to customize.
FNC
Screen
Adjustment
Rear Camera
-
Settings Background
Key1 Key2
Favorite
Key3 Key4
Key Customize
Sound Effect
• To customize the (favorite) button, touch the
icon under favorite instead.
2 Select an item (1) you want to display in
the selected menu, then touch [ × ] to set
(
2).
FNC
-
Settings
Key1
Key Customize
Key1 Customize
Settings
Car Setting
Fader / Balance
Sound Effect
Equalizer
3 Repeat steps 1 and 2 to replace the other
menus.
Remote Controller Remote Controller
Remote controller RM-RK258 is supplied for
KW-V250BT Region 3/KW-V250BTM Region 2.
• For KW-V250BT Region4: To use the remote
controller, purchase optional remote controller,
RM-RK258.
Refer to the instruction manual supplied with the
remote controller.
• This unit is equipped with a steering wheel remote
control function. (Page35)
– See page 40 for connection.
– Operations may differ depending on the type of
steering wheel remote control.
* DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
Remote sensor*
36
ENGLISH
00_KWV_2019ST_MM2X_EN.indb 3600_KWV_2019ST_MM2X_EN.indb 36 1/6/2018 12:07:08 PM1/6/2018 12:07:08 PM