JVC KW-V250BTM - Display Settings

Determining the value for <Position DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1 Determines the center of the currently set
listening position as the reference point.
2 Measures the distances from the reference point
to the speakers.
3 Calculates the differences between the distance
of the furthest speaker and other speakers.
4 Sets the DTA value calculated in step 3 for
individual speakers.
5 Adjusts gain for individual speakers.
E.g. When <Front All> is selected as the listening
position
+90 cm
60 cm
80 cm
+70 cm
150 cm
+0 cm
SettingsSettings
Display settings
Display the <Display> screen.
On the Home screen, touch as follows:
Then, on the <Settings> screen, touch [Display].
E.g. Display settings screen
<Dimmer>
• Auto (Initial): Dims the screen and button
illumination when you turn on the headlights.
– Connection to the car light control switch is
required. (Page41)
• ON: Activates dimmer.
• OFF: Deactivates dimmer.
<User Customize>
You can change the display design. While playing a
video or picture, you can capture an image and use
the captured image as a background.
• You cannot capture copyrighted content and
images.
• When using a JPEG file as the background, make sure
that the resolution is 800 x 480 pixels.
• The color of the captured image may look different
from that of the actual scene.
1 Change the background design
Display the background design selection screen (1),
select the dimmer setting (2) ([ ]: dimmer on or
[ ]: dimmer off), then select the background design
(3).
When one of these is selected, you can
change the background color.
30
ENGLISH
00_KWV_2019ST_MM2X_EN.indb 3000_KWV_2019ST_MM2X_EN.indb 30 1/6/2018 12:07:07 PM1/6/2018 12:07:07 PM