JVC KW-V250BTM - Tuner

iPod/iPhone iPod/iPhone
2
Select a category (1), then select a
desired item (
2).
Select an item in each layer until you reach and
select the desired file.
• Available categories differ depending on the type
of iPod/iPhone.
Settings for iPod/iPhone playback
1 Display the <iPod Mode> screen.
On the source control screen, touch as follows:
2 Make the settings.
<Artwork>
• ON (Initial): Shows the artworks of the playing
files.
• OFF: Hides the artworks of the playing files.
Listening to the radio
The unit switches to FM alarm scene automatically
when receiving an alarm signal from FM broadcast.
Playback information on the source control
screen
1 Selects the band (AM/FM1/FM2/FM3)
2 Text information
• Touching [ H ] scrolls the text if not all of the text
is shown.
• Touching [Radio Text] switches the information
between Radio Text, Radio Text Plus and PTY
code.
3 Current station frequency
4 Displays the preset stations window (Page17)
• To hide the window, touch [ I ].
5 [P1] – [P5]
• (Touch) Selects a preset station.
• (Hold) Presets the current station.
Tuner Tuner
6 Displays/hides other available operation keys*
7 NEWS indicator
8 AF indicator
9 TI indicator
p Operation keys*
q ST/MONO indicator
The ST indicator lights up when receiving an FM
stereo broadcast with sufficient signal strength.
w Seek mode indicator
e LO.S indicator
r RDS indicator
t EON indicator
The EON indicator lights up when a Radio Data
System station is sending EON signals.
* See the following “Operation keys on source control screen”.
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page7.
15
ENGLISH
00_KWV_2019ST_MM2X_EN.indb 1500_KWV_2019ST_MM2X_EN.indb 15 1/6/2018 12:07:04 PM1/6/2018 12:07:04 PM