JVC KW-V250BTM - Usb

VideoVideo USB USB
You can connect a USB mass storage class device such
as a USB memory, digital audio player, etc. to the unit.
• For playable file types and other information, see
pages42 and44.
• You cannot connect a PC or portable HDD to the
USB input terminal.
• You cannot connect a USB device via a USB hub.
Connecting a USB device
On the monitor panel
USB device
(commercially available)
The source changes to “USB” and playback starts.
• All tracks in the USB device will be played repeatedly
until you change the source or disconnect the USB
device.
Touching the operation keys performs the following
actions:
1
[ ]
Refer to “Video playback except VCD” on
page10.
[
]
[
]
2
[ MENU]
Displays the disc menu.
[
]
Selects the audio channel
(ST: stereo, L: left, R: right).
[
]*
Displays or hides the direct selection
keys.
1 Touch [DIR/CLR] to select a track
directly on a VCD.
2 Touch the numbers ([0], [1] to [9]) to
select the desired track.
3 Touch [Enter] to confirm.
To delete the last entry, touch [DIR/
CLR].
[Return] Displays the previous screen or menu.
* You need to stop playback to deactivate the PBC function when
playing a VCD with PBC activated.
Playback operations
Playback information and key operation
• For playback information, see “Source control screen”
on page6.
• For key operations on the touch panel, see “Common
operation keys on source control screen” on
page7.
Selecting the file type to play
You can specify the file type to play.
E.g. USB source control screen
Select the file type as follows:
[Audio] Plays back audio files.
[Video] Plays back video files.
[Photo] Plays back still picture files.
If the USB device contains no files of the selected type,
the existing files are played in the following priority:
audio, video, then still picture. You can change these
settings only while playback is stopped.
12
ENGLISH
03_KWV_2019ST_MM2X_Body01.indd 1203_KWV_2019ST_MM2X_Body01.indd 12 28/6/2018 3:06:16 PM28/6/2018 3:06:16 PM