JVC LT-32D200 User Manual

17
EN
INTRODUCTION
PREPARATION WATCHING TV
OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING
INFORMATION
English
5 Still Mode
You can pause the image shown on the TV screen.
Press [PAUSE F] to pause the image shown on the TV
screen.
Still
• The sound output will not be paused.
• If no signal is detected or protected signal is received
during still mode, the image remains paused and the
sound output will be muted.
• The still function will be released after 5 minutes.
To cancel still mode, press any button except [POWER].
5 Switching Each Input Mode
You can easily switch with the remote control to the DTV (ATSC) and TV
(NTSC) or to access external devices when they are connected to the unit.
Press [INPUT SELECT] or [CHANNEL ] repeatedly to
cycle through the input modes.
or
Video
Component
HDMI1
HDMI2
DTV/TV channel
(or PC input)
• Pressing [CHANNEL ] reverses the direction of the
input modes.
5 Switching Audio Mode
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
TV
Press [AUDIO] to display the currently selected
audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.
11
SAP / STEREO
When all audio are available
SAP / STEREO SAP / MONO
SAP / STEREO
When stereo and monaural audio are available
MONO / STEREO MONO / STEREO
When SAP and monaural audio are available
SAP / MONO SAP / MONO
When only monaural audio is available
MONO
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
DTV
1
Press [AUDIO] to display the currently selected
language and the number of available languages.
11-1
English 1/3
2
Press [AUDIO] repeatedly to cycle through the
available audio languages.
• Available languages differ depending on the
broadcast. “Other” is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
Note:
• [AUDIO] does not control external audio devices.
• The information display will automatically disappear in a
few seconds.
(cannot be switched)

JVC LT-32D200 Specifications

General

HD type	Not supported
Display diagonal	32 \
Display brightness	360 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Contrast ratio (typical)	1200:1
Screen format adjustments	4:3, 16:9
Power requirements	120V, 60HZ
Operating temperature (T-T)	5 - 40 °C
RMS rated power	20 W
Number of speakers	2
Equalizer bands quantity	5
Image formats supported	JPG
Optical disc player type	DVD player
Digital audio coaxial out	1
Component video (YPbPr/YCbCr) in	3
Product color	Black
Panel mounting interface	200 x 100 mm
Power consumption (typical)	160 W
Tuner type	Analog & digital

Weight and Dimensions

Depth (with stand)	234 mm
Width (with stand)	760 mm
Height (with stand)	563 mm
Weight (with stand)	9800 g
Depth (without stand)	127.5 mm
Height (without stand)	519.3 mm
Weight (without stand)	9300 g