JVC LT-32D200 - DVD Settings - Other Functions; Still Mode and Auto Power Off

47
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
DVD SETTING
TROUBLESHOOTING
INFORMATION
English
5 Others
You can change the other functions.
1
Press [SETUP] to display the main menu.
PICTURE
SOUND
CHANNEL
DETAIL
LANGUAGE
DVD
2
Use [Cursor
K
/
L
] to select “DVD”, then press [ENTER].
t
Setup
Press “ENTER” key to move to DVD Setup
PICTURE
SOUND
CHANNEL
DETAIL
LANGUAGE
DVD
3
Use [Cursor s / B ] to select “ ”, then press [ENTER].
OTHERS
EN TER/ O K
ANGLE ICON ON
STILL MODE AUTO
AUTO POWER OFF ON
4
Use [Cursor
K
/
L
] to select the desired item, then press
[ENTER].
ANGLE ICON (Default: ON)
Set to “ON” to show the angle icon when multiple
camera angles are available during DVD playback.
OTHERS
EN TER/ O K
ANGLE ICON ON
STILL MODE AUTO
AUTO POWER OFF ON
STILL MODE (Default: AUTO)
Set the picture quality in the still mode.
If you select “AUTO”, it automatically selects the best
resolution setting (“FRAME” or “FIELD”) based on the
date characteristics of the pictures.
FIELD : The picture in the still mode will be
stabilized.
FRAME : The picture in the still mode will be highly
defined.
OTHERS
EN TER OK
ANGLE ICON ON
STILL MODE AUTO
AUTO POWER OFF ON
AUTO POWER OFF (Default: ON)
Set to “ON” to turn this unit off automatically after 20
minutes of no use.
OTHERS
EN TER OK
ANGLE ICON ON
STILL MODE AUTO
AUTO POWER OFF ON
5
Press [SETUP] to exit.