31
Changing the settings : Setup
◆ Options when the current input signal is HD
● You can select “ Full Native ” only when the input signal is 1080i/p.
■ Full : Stretching a picture to the
width of the monitor.
■ Full Native : Displaying a picture
of 1080i/p without enlargement.
■ Slim : Shrinking a picture
horizontally. Black areas remain
at the left and right side of the
picture.
■ Panoramic Zoom : Zooming
a picture without unnatural
deformation in the way to edge
out the black parts around a
4:3-aspect cinema program
transferred through 16:9-aspect
signal.
◆ Options when the current input signal is from a PC
● You cannot select “ Just ” and “ 1:1 ” for some input signals.
■ Full : Stretching a picture to the
width of the monitor.
■ Just : No modifying of aspect. Black
areas remain at the left and right
side of the picture.
■ 1:1 : No modifying of aspect or
resolution. Black areas remain
around the picture.
WX70insteu.indb31WX70insteu.indb31 09.3.911:10:27AM09.3.911:10:27AM
To Next Page
Loading...
Need help?
General
