JVC RV-NB200BT - Playing Back Cds or Audio Files (USB, CD); Selecting a Folder (Audio Files Only)

14
Playing a CD or audio file (USB, CD)
On the remote: Use the "SOURCE" button to select the source and press uII button to start the
playback.
On the main device: Use the
"
button to select the desired source and press the uII button to
start playback
ForUSBdevicesorCDscontainingaudioles(suchasMP3),thenumberofexistingfoldersandles
is displayed as follows:
F--xx t--XXX
The number behind "F" standsforthenumberoffoldersandthe2numberblockthetotalno.oftracks.
ForaudioCDs,informationaboutthenumberoftracksandtotalplayingtimeisdisplayedasfollows:
XX XX:XX
Therstnumberblockstandsforthenumberoftracksandthe2forthetotalplayingtimeoftheCD.
Basic operating functions
Stop playback: Press the button on the device or on the remote control to stop the playback.
Interrupt the playback: Press the uII button on the device or on the remote control to interrupt the
playback.Thesignalashesonthedisplay.Anotherpressingofthebutton resumes playback.
Searching for a specific passage during playback: Press and hold the or button on the
deviceorontheremotecontrolmorethan2secondstoactivatefast reverse or fast forward. Once
thedesiredpositionhasbeenreached,releasethecorrespondingbutton.
Select a specific track: Press the or button on the main devise or on the remote control in
playback,pauseorstopmode.
Jump every 10 track: Press the
+10
or
-10
buttonontheremotecontrolinplay,pauseor stop
mode.
Select a specific folder (audio files only): Press on the
Fold+
or
Fold-
on the remote control to select a
folder.
Display the ID3 information: Press the "INFO" button on the remote control to display ID3 tags.