EasyManua.ls Logo

JVC RV-NB200BT - Expanded DAB + Information; Menu Functions DAB

JVC RV-NB200BT
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Expanded DAB + information
With DAB + additional information is transmitted in addition to the music signal. These can be retrie-
ved as follows.
Press the "INFO" button on the remote control to retrieve the following information in succession:
Signal level: The display shows the level using icons from left to right.
Themoreiconsdisplayed,thebetterthereception.
PTY (Program Type):Thisdesignatestheclassicationofthestationsaccordingtogenre,e.g.Pop,
News,Religion,Info,Classics,etc.
•Nameoftheensemble,e.g.DRGermany
• Display of channel and frequency of the set station
ERR XX: This information shows the error rate of the digital reception. This is also dependent on
the signal level and can also be used to align the antenna.
XX kbps:Displayofthedatarateofthestatione.g.80kbit/s.Thedataratemayvaryfromstation
to station.
DABPLUS: Designates the reception mode "DAB +".
• Current date
Menu functions DAB +
Pressing and holding the"MENU" button opens a menu in which you can set various functions for
DAB+. Use the
or buttons to scroll through the menu. The following functions are available:
Full scan:Anotherautomaticstationsearch.Conrmthefunctionwiththe
uII
button.
Manual tune:Thisallowsyoutomanuallysetaspecicreceptionstation.Usingthe
uII
button
conrmsthefunctionandshowsthecurrentlysetstationwiththecorrespondingfrequency.
• Press the
or
button to manually select another channel. Using the
uII
button you can
conrmtheselection.Afterthat,thesignallevelisshowninthedisplay,anotherpresschargesthe
current ensemble.
DRC (Dynamic Range Control):Ifsupportedbytheselectedstation,itispossibletoadjustthe
dynamic range. Possible settings are "Off","Low" and "High". The selection is made using the
or buttons,theselectionisconrmedwiththe
uII
button.
PRUNE: This deletes invalid stations from the station list. Select "Yes/No" using the
or ,
buttonsandconrmtheselectionwiththe
uII
button.
• SYSTEM: Settingsforsleeptimer,time,backlight,languageandfactorysettings,softwareupgrade
and software version.

Related product manuals