JVC RV-NB200BT - Random Play and Repeat Function; Procedure for Audio CD; Procedure for Audio Files; Using the DAB + Radio

16
Random playback and repeat function
Procedure for audio CD
• Press the "RANDOM" button on the remote control to start random playback. Pressing the
"RANDOM" or pressing the button will cancel random playback.
• Press the "REPEAT" button on the remote control to activate the repeat function. Repeated
pressing switches the following functions:
Repeat thecurrenttrack(Display"REP-1")
Repeatalltracks(display"REP-ALL")
Press the
uII button to start playback.
Pressing the
button turns off the repeat function.
Procedure for audio files
• Press the "RANDOM" button on the remote control to start random playback. Pressing the
"RANDOM" or pressing the button will cancel random playback.
• Press the "REPEAT" button on the remote control to activate the repeat function. Repeated
pressing switches the following functions:
Repeat thecurrenttrack(Display"REP-1")
Repeatthecurrentfolder(Display"REP-DIR")
Repeatalltracks(display"REP-ALL")
Press the
uII button to start the repeat function.
Pressing the
button turns off the repeat function.
Using the DAB + radio (RV-NB300DAB)
Press the"SOURCE" button on the remote control or the
"
button on the device until "DAB"
appears in the display.
Start the automatic station search
• Press the "MENU" button on the device to enter the DAB menu.
The display shows "Full search". Start the search with the II uII button.
•Duringthesearch,thedisplaywillshowthenumberofstationsfoundsofar.
 Ifnostationsarefound,"No DAB Station"willbedisplayedforapprox.2secondsandthen
changes to "Full scan".
 Pleasecheckthecorrectorientationoftheantennaortrytondanotherlocationforthedevicefor
better reception.