JVC RX-5060BJ - Page 8

1-8 (No.MB504)
3.1.2 Removing the front panel assembly
(See Fig. 3 to 5)
(1) Remove the three screws C attaching the top side of front
panel assembly.
(2) Remove the four screws D attaching the bottom side of
front panel assembly.
(3) Remove the one screw E attaching the ground wire to front
chassis.
(4) Disconnect the connector to CN404
of audio board, CN504
of video board, CN402 of main board and CN201 of regu-
lator board.
Fig.3
Fig.4
Fig.5
C
D
E
CN504
CN404
CN402
CN201
Regulator board
Main board