JVC RX-DP20VBK User Manual

65
English
Search for a disc by its disc title:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press % / fi to move to “SEARCH,” then press
SET.
The DISC SEARCH screen appears.
3. Press % / fi to move
to “DISC TITLE,”
then press SET.
The DISC TITLE SEARCH
screen appears.
4. Press % / fi / @ / # to
move
in front of the
first character of the
disc title you want to
search for, then press
SET.
To correct an incorrect
entry, press % / fi / @ / # to move in front of the correct
character, then press SET.
Note:
Symbols such as @, # or $ are not be available for search.
5. Press SET again.
Disc search starts, then the
SEARCH RESULT screen,
showing the disc titles,
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information:
Press % / fi to move to a searched disc, then press
@ / #. Each time you press @ / #, the disc information
alternates between its disc title and its performer.
• Starting a disc play and going to the Disc Information
screen (see page 64): Press % / fi to move
to a searched
disc, then press SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appear.
• Going back to the DISC TITLE SEARCH screen: Press
EXIT.
Searching for a Disc (Only for the CD player)
Search for a disc by its performer:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press % / fi to move to “SEARCH,” then press
SET.
The DISC SEARCH screen appears.
3. Press % / fi to move
to “PERFORMER,”
then press SET.
The PERFORMER SEARCH
screen appears.
4. Press % / fi / @ / # to
move
in front of the
first character of the
performer you want to
search for, then press
SET.
To correct an incorrect
entry, press % / fi / @ / # to move
in front of the correct
character, then press SET.
Note:
Symbols such as @, # or $ are not available for search.
5. Press SET again.
Disc search starts, then the
SEARCH RESULT screen,
showing the performers,
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information:
Press % / fi to move
to a searched disc, then press
@ / #. Each time you press @ / #, the disc information
alternates between its performer and its disc title.
• Starting a disc play and going to the Disc Information
screen (see page 64): Press % / fi to move to a searched
disc, then press SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appear.
• Going back to the PERFORMER SEARCH screen: Press
EXIT.
EN61-67_RX-DP20VBK[C]f 03.6.12, 2:24 PM65

JVC RX-DP20VBK Specifications

General

Brand	JVC
Model	RX-DP20VBK
Category	Receiver
Language	English