JVC SP-AP1-B - Basic Connections; Connecting the Power Cord

5English
English
Basic connections
Connecting the power cord
Connect the supplied AC power cord to the
AC IN terminal on the System. Then plug the
power cord into a wall outlet.
Back of the System
• Unplug the AC power cord from the wall
outlet when you leave the house or if the
System will not be used for a prolonged
period of time.
CAUTION
• To avoid the risk of fire and electric shock
– Do not use any A
C power cords other than
the one provided.
– Do not use the supplied AC power cord for
any other equipment.
AC power cord
(supplied)
To the wall outlet
SP-AP1[E]04.indd5SP-AP1[E]04.indd5 2013/10/1614:192013/10/1614:19
Downloaded from www.vandenborre.be