K-Patents PR-23-GP - 6.4.4 Entering field calibration parameters; 6.4.5 Direct BIAS adjustment; 6.5 Configuring prism wash

50
PR-23 instrucon manual
Press the FIELD
SAMPLE so key...
...wait while
DTR measures...
(take sample for lab)
...and press REPEAT for next
data point or BACK to get to
the Sensor status display.
Figure 6.13 Using FIELD SAMPLE so key
−             
−           
    
−       
−     
          
6.4.4 Entering field calibraon parameters
           5 CAL-
IBRATION        1 CHEMICAL & FIELD PARAMETERS 
  2 FIELD CALIBRATION PARAMETERS
             
          
6.4.5 Direct BIAS adjustment
           
   
             
NEW CONC  OLD CONC  f00
6.5 Configuring prism wash
              
             
         
               
                
               
    