K-TRON K-Commander User Manual

805.77
K-Commander Loss-in-Weight Programming
Rev: G Produced by the K-Tron Institute
LWF Page 09: Control or Tuning Parameters, Continued
Page 09
variable list
con't
Variable Name Edit? Description
Adaptive Tuning
Enabled
`
Off
On <
It is recommended that the
Adaptive Tuning be left on for all
operations. Selecting "off" results in
no updating of the Kalman filter
data and potential less than
optimal performance by the feeder
controller. Default value is "Off"
Feeder Run Time `
This is the length of time in hours
that the feeder has been running
since the variable was cleared.
Enter the value of "0" to clear the
variable.
Drive Command Ceiling Sets the maximum motor drive
command. The range is: 0 to 125%.
The default is 125%.

K-TRON K-Commander Specifications

General

Brand	K-TRON
Model	K-Commander
Category	Control Panel
Language	English