KAESER BSD 60 User Manual

Fig. 22 Acknowledging messages
10 Warning LED (yellow)
11 Alarm LED (red)
12 «Acknowledge» key
Alarm message
An alarm shuts the machine down automatically. The red LED alarm flashes.
The last line in the display shows the actual fault causing the alarm.
Precondition The fault has been rectified
➤ Acknowledge the message with the «acknowledge» key.
alarm LED extinguishes.
The machine is ready for operation again.
If the machine has been shut down with the «EMERGENCY STOP» pushbutton:
➤ Unlatch the «EMERGENCY STOP» pushbutton (turn in direction of the arrow) before ac‐
knowledging the alarm message.
Further information A list of possible alarm messages occurring during operation are shown in chapter 9.2.
Warning message
If maintenance work is to be carried out or if the warning is displayed before an alarm, the yel‐
low warning LED flashes.
The last line in the display shows the warning message.
Precondition The danger of an alarm is passed,
maintenance has been carried out.
➤ Acknowledge the message with the «acknowledge» key.
The warning LED extinguishes.
Further information A list of possible warning messages occurring during operation are shown in chapter 9.3.
8 Operation
8.5 Acknowledging alarm and warning messages
52
Service Manual Screw Compressor
BSD 9_5708 08 USE

KAESER BSD 60 Specifications

General

Brand	KAESER
Model	BSD 60
Category	Compressor
Language	English