Kaiser Baas WiFi Photo & Document Scanner - Calibration; From iPad, iPhone and iPod Touch; From Android devices

21
20
If dark lines or stripes appear on your scanned images, the scanner may need
to be calibrated. Follow these steps:
From iPad, iPhone and iPod Touch
1. Press iScan Air app. Press the Settings at the top-right corner of
the app to reveal the menu, then select the Calibrate setting
2. Remove the plastic foil on the calibration card and insert it into the feed
slot with the arrow mark facing up and pointing to the scanner
The calibration card will be pulled into scanner, and the WiFi LED
indicator will blink pink whilst calibrating. Wait until the calibration card
is ejected with a ‘Calibration done.’ message.
Press the OK button
3. If lines still appear, clean the roller and clean the lens then repeat
calibration procedure.
Note: It’s advised to do
a calibration procedure periodically.
Note: It’s advised to do a calibration procedure periodically
CALIBRATION
From Android devices
1. Press iScan Air app. Press the Settings (settings button depend on
device that you are using), a menu will appear then select the Calibrate
setting.
2. Remove the plastic foil on the calibration card and insert it into the feed
slot with the arrow mark facing up and pointing to the scanner
3. Press the calibrate button
The calibration card will be pulled into the scanner, and the WiFi LED
indicator will blink pink whilst calibrating. Wait until the calibration card
is ejected with ‘Calibration done.’ message.
4. If lines still appear, clean the roller and clean the lens then repeat
calibration procedure.
CALIBRATION