29
28
CARE - CLEAN ROLLERS
From Windows devices
1. Press iScan Air app. Swipe in from the right side or move the cursor
to the upper-right or lower-right of your device’s screen to reveal the
menu bar, then select the Clean setting
2. Hold the foam strip of cleaning board facing down, gently insert it into
the feed slot
3. Press the Clean button
The cleaning board will be pulled into scanner, and the WiFi LED indicator
will blink pink whilst cleaning. Wait until the cleaning board is ejected
with a ‘Cleaning done’ message, then press the CLOSE button
CARE - CLEAN ROLLERS
From Windows phone devices
1. Press iScan Air app. Press the setting icon at the bottom-right corner to
reveal the menu, then select the Clean setting
2. Hold the foam strip of cleaning board facing down, gently insert it into
the feed slot
3. Press the Clean button
The cleaning board will be pulled into scanner, and the WiFi LED indicator
will blink pink whilst cleaning. Wait until the cleaning board is ejected
with a ‘Cleaning done’ message, then press the CLOSE button
POWER
A8
A6
A4
POWER
A8
A6
A4
Note: Advisable to clean rollers periodically using this procedure
Note: Advisable to clean rollers periodically using this procedure
To Next Page
Loading...
