Low impedance voltage measurement (LowZ)
LowZ mode allows you to measure AC voltages with a low impedance (approx. 300 kΩ).
In this mode, the multimeter lowers the internal resistance to prevent ‘phantom’ voltage readings.
As a result, the circuit is more heavily loaded than in the standard measuring mode.
Set the rotary switch to "LowZ" to use the function.
The LowZ voltage measurement must not exceed 600 V.
Due to the reduced impedance, this measurement function is not suitable for continuous
measurement. A max. The measurement duration of 1 minute must be observed.
8
To Next Page
Loading...
