Introduction
KAIWEETS HT206B is a digital True-RMS clamp meter with automatic range selection.
The Low Impedance (Low-Z) mode can detect and eliminate ghost or stray voltages.
Safety Information
Warnings: Read First
To avoid possible electric shock or personal injury, please obey the following instructions:
• Use the Meter only as specified in this manual or the protection provided by the Meter might be
impaired.
• Avoid working alone so assistance can be rendered.
• Never measure AC current while the test leads are inserted into the input jacks.
• Do not use the Meter in wet or dirty environments.
• Inspect the test leads before use. Do not use them if insulation is damaged or metal is exposed.
• Check the test leads for continuity. Replace damaged test leads before using.
• Use extreme caution when working around bare conductors or bus bars. Contact with the conductor
could result in electric shock.
• Do not hold the Meter anywhere beyond the tactile barrier.
1
To Next Page
Loading...
