Kamstrup M-Bus Master - Operation and Reading of M-Bus Master

5511-185 GB-DE-DK/03.2005/Rev. E1
7
6. Operation and reading
of M-Bus Master
The M-Bus system can be read either via
a computer with the program PcM-Bus for
Windows 98/2000/XP, or direct from the
display of M-Bus Master.
When reading the M-Bus Master,
the IR head must be placed as shown:
For reading via PC either IR head, or a data
cable connected from the M-Bus Master’s
bracket to a COM port of the PC is used.
See the instructions for the reading
program.
Note:
IR head
66-99-102
or datacable
66-99-106
must be used
in order to
obtain correct
meter data.
IR head 66-99-102 Data cable 66-99-106