801 as
well as the configuration of other Kamstrup heat, cooling and water meters.
14.1.1 System requirements
METERTOOL requires minimum Windows XP SP3, Windows 7 Home Premium SP1 or newer as well as Windows
Internet Explorer 5.01 or newer.
Minimum: 1 GB RAM Recommended: 4 GB RAM
10 GB free HD space 20 GB free HD space
Display resolution 1280 X 720 1920 x 1080
USB
Printer installed
Administrator rights to the PC are required in order to install and use the program.
The program must be installed under the logon of the person who is to use the program.
14.1.2 Interface
The following interfaces can be used:
Verification equipment Item no. 66-99-370 Verification of 67-F/K (4-W/Pt100) and total/partial reconfiguration
Verification equipment Item no. 66-99-371 Verification of 67-G/L (4-W/Pt500) and total/partial reconfiguration
Data cable w/USB Item no. 66-99-098 Total/partial reconfiguration
Optical eye USB Item no. 66-99-099 Partial reconfiguration
Optical eye COM-port Item no. 66-99-102 Partial reconfiguration
Bluetooth Optical Eye Item no. 66-96-005 Partial reconfiguration
Using equipment with Kamstrup USB, the USB driver must be installed before connection.
14.1.3 Installation
Check that system requirements are fulfilled.
Close other open programs before starting the installation.
Download the METERTOOL software from Kamstrup’s FTP-server and follow the program’s directions through the
installation.
During installation, METERTOOL HCW detects whether a USB-driver for the optical read-out head has been installed.
If not, you will be asked if you would like to install it. Answer yes to this question.
When the installation has been completed, the icon ”METERTOOL HCW” will appear in the ‘All Programs’ menu
under ‘Kamstrup METERTOOL’ (or from the menu ”start” for Windows XP) and as a link on the desktop. Double-click
on link or icon in order to start the program.
To Next Page
Loading...
Need help?
General
