Kaye LTR-150 - 4.4.1 Set Screen Brightness; Adjusting Display Brightness; 4.4.2 Set Language Selection; Changing Interface Language

16
| Kaye LTR-150 - Dry Block & Liquid Bath All-in-One Temperature Calibrator
4.4.1 Set Screen Brightness
You can modify the screen brightness (100% default) by tapping on the Display Settings
calculator icon then choose Brightness on the Set Display window.
 Enter the desired value (1 through 100) for screen brightness on the numeric keyboard.
 Confirm selection by touching the check mark icon to save the change and then the
to return to the Calibrator Set Up window.
4.4.2 Set Language Selection
Select Language selection from the Calibrator Set Up window by touching the world
icon. The current language is indicated in the information box on the left while all installed
languages can be seen in the selection list on the right.
 Select the desired language by tapping the desired language.
 Confirm selection by tapping on the check mark icon in the lower right of the screen,
which will then return you to the Calibrator Set Up window.
4.4 3 Set Date and Time
Select Date and Time from the Calibrator Set Up window. Options are available to change
the date and time format.
 By tapping the respective field, a window is opened for the input/change.
 Make the necessary adjustment then touch the check mark icon to save the change and
then the to return to the Calibrator Set Up window.
4.4.4 Set Temperature Units
By tapping on the thermometer icon, a temperature unit selection list appears providing you
with the option to choose between Celsius, Fahrenheit, and Kelvin.
Touch the desired temperature unit, which will then be identified by a check mark.
Confirm selection by touching the check mark icon to save the change and return you to
the Calibrator Set Up window.
4.4.5 Set Decimal Resolution
You can define the format of the temperature values in the windows by tapping on the
pencil and ruler icon.
 Touch the desired temperature precision, which will then be identified by a check mark.
 Confirm selection by touching the check mark icon to save the change and return you
to the Calibrator Set Up window.
Chapter 4. Getting Started