KBL 4800 alpha - Aquacool and Aroma Connections

• Attach the connectors to the T-Max board and
housing (ground).
• Attach the cover of the T-Max Box.
• Fasten the timer above the T-Max box, using the
two screws.
TIMER
• Connect the external cable and the timer to the
T-Max box.
• The exposure times stated in the expo-
sure schedule must be entered at the
external timer.
• Information on how to enter the expo-
sure time can be found in the operating
instructions of your external timer.
5.11 aquaCool and Aroma
connections
AQUACOOL
The aquaCool box is equipped with a liquid-
level sensor ① as well as with a connection to
the aquaCool canister ②. Furthermore, the box
houses the compressor ensuring the compressed-
air supply ③, and the Aroma box ④ with its related
connections.
①
②
④
③
1
Connector (liquid-level monitoring)
2
Connection to aquaCool canister
3
Compressor with compressed-air
connection
4
Aroma box
AROMA
The Aroma box is attached within the aquaCool box
and equipped with three hose connections, one for
the compressed-air supply
⑤ and two leading to the
Aroma nozzles ⑥.
⑥⑥
⑤
5
Aroma box (inlet)
6
Aroma box (outlets)
Operating Instructions | KBL 4800 alpha
23