WARNING
Excessive dose of UV radiation
Excessively prolonged tanning sessions
may cause severe damage to skin and
eyes.
• Never operate the tanning device with a
defective timer.
• Observe the tanning times given in the
exposure schedule.
The following explanations and functions refer to a
tanning device that is fully equipped with all features.
8.2 Starting the tanning
session
The tanning session automatically starts after the
external timer controlled delay time has expired.
During the preset delay time the tanning session can
be started anytime manually using the START button
at the tanning device.
8.3 Operation during the
tanning session
You can control the functions of the tanning device
via the interior control panel during the tanning
session. It is particularly easy for you to access the
basic functions.
Buttons with recesses that can easily be sensed
allow for easy operation of the system even with your
eyes closed.
NOTES:
20 seconds after your last input, the interior control
panel changes over to the indication of the tanning
time. An information line at the bottom edge of the
interior control panel shows the current music track.
START BUTTON
• Starts the tanning session during the timer con-
trolled delay time,
• as well as after an interruption caused by pressing
the STOP button, provided that the booked tan-
ning time has not elapsed yet.
STOP BUTTON
• Stops the tanning session
if pressed for at least two
seconds.
DISPLAY
• Shows the menu items and
functions.
• Indicates the tanning time.
• Information line.
ARROW BUTTONS
• Allows the selection of
subordinate functions.
+/- BUTTONS
• Control the functions.
Position recessed
button
8. Tanning mode
Operating Instructions | KBL 4800 alpha
28
To Next Page
Loading...
